Can anyone confirm/deny the validity of these methods or make suggestions on how to better accomplish activation after a reinstall? I am mainly concerned with XP since the information I have found is rather scattered and I am not sure if its possible to activate a "royalty free OEM" using a generic OEM/retail disk install and Windows Key Update Tool or if I would need to use one of the old methods of backing up the files and altering the install disk.
If there are any known issues with activation on any version using the windows images/techniques I listed can someone please elaborate on them. I am asking because I started a new job that requires re-installing every version of windows on various computers that have OEM and retail versions.
windows 7 loader slic activation with oem information free 46
If Windows is pre-installed on a computer by an original equipment manufacturer (OEM), the operating system is automatically activated without the need for interaction from the user.[11] In this case, the copy of Windows installed does not use the product key listed on the certificate of authenticity, but rather a master product key issued to OEMs called a System Locked Pre-installation (SLP) key. On each boot, Windows confirms the presence of specific information stored in the BIOS by the manufacturer, ensuring the activation only remains valid on that computer, even if the product key is used on another machine.[6]
Activation is performed with a utility supplied with Windows and Office called the Activation Wizard. It can be performed either over the Internet or by telephone.[1] When activating over the Internet, the Activation Wizard automatically transmits and receives verification data to and from Microsoft servers, completing the process without any interaction by the user.[26] Activation by telephone requires that a user and a Microsoft agent verbally exchange activation information. In this case, an installation ID is generated, which is then read to the agent. The agent verifies the information and replies with a confirmation ID, which is then typed into the Activation Wizard.[26]
While Microsoft says that product activation benefits consumers by allowing Microsoft to produce higher quality software,[1] it has nevertheless received much criticism regarding its design and implementation, effectiveness at stopping piracy and respect of privacy rights. For instance, during the development of Windows XP, beta testers strongly criticized the introduction of product activation, particularly because a change in computer hardware required re-activation.[33] Ken Fischer at Ars Technica questioned whether activation would ultimately be effective in stopping piracy, stating that while casual computer users would be affected, he would "be a fool to think that someone out there won't find a way to break this whole thing."[34] Dave Wilson, a technology columnist at the Los Angeles Times, describes activation as "just another example of a rapacious monopolist abusing computer users who are helpless to do anything about it." He too believed that the system would not have "any significant effect on professional pirates."[35] Fred Langa at InformationWeek, with reference to the transmission of hardware information during activation, stated that "many users are incensed at this level of monitoring, intrusion, and control by Microsoft."[2] Finally, Dr. Cyrus Peikari and Seth Fogie, security consultants, considered product activation to be "hostile both to privacy and to human dignity."[36]
1 uninstall kb971033 u can find it in the list of installed updates2 install latest windows loader, run and reboot when it tells u3 go to start and run the command line interface in administrative mode by typing run in the search box and instead of just pressing enter press ctrl + shift and enter, the command line interface should pop up in administrative mode4 paste the rearm command wich is : slmgr.vbs -rearm and enter and reboot when it tells u to5 windows genuine ? and no msg6 yeah fu windows activations technology WAT
1 uninstall kb971033 u can find it in the list of installed updates2 install latest windows loader, run and reboot when it tells u3 go to start and run the command line interface in administrative mode by typing run in the search box and instead of just pressing enter press ctrl + shift and enter, the command line interface should pop up in administrative mode4 paste the rearm command wich is : slmgr.vbs -rearm and enter and reboot when it tells u to5 windows genuine and no msg6 yeah fu windows activations technology WAT
BGA ICXtal:1DDR3 init.DRAMC init done. Calculate size.DRAM size=512MBSet new TRFC.ddr-13337516DRAMC V1.0 (0)Press 'x' or 'b' key in 1 secs to enter or skip bootloader upgrade.EN751627 at Fri May 15 15:20:05 CST 2020 version 1.1 free bootbaseSet SPI Clock to 50 Mhzspi_nand_probe: mfr_id=0xef, dev_id=0xabUsing Flash ECC.Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25M02G, Flash Size=0x10000000bmt pool size: 163 BMT & BBT Init Success ZyXEL zloader v1.4.4 (05/15/2020 - 15:20:04)Multiboot client version: 2.4Not found TC PhyNot found TC PhyNot found TC PhyNot found TC PhyNot found TC Phy GE Rext AnaCal Done! (4)(0x1c) Hit any key to stop autoboot: 0 main tclinux.bin have ZYXEL trx header! main tclinux.bin Start to decrypt RSA!==> boot flag = 0from mainDecompress to 80002000 free_mem_ptr=80950000 free_mem_ptr_end=807B0000Uncompressing [LZMA] ... done.Initializing cgroup subsys cpusetInitializing cgroup subsys cpuInitializing cgroup subsys cpuacctLinux version 3.18.21 (howard@TWPCZT02587-03) (gcc version 4.6.3 (OpenWrt GCC 4.6.3 unknown) ) #2 SMP Fri May 15 16:39:01 CST 2020memsize:432MBEcoNet EN751627 SOC prom initbootconsole [early0] enabledCPU0 revision is: 0001992f (MIPS 1004Kc)Determined physical RAM map: memory: 1affe000 @ 00002000 (usable)Wasting 64 bytes for tracking 2 unused pagesZone ranges: Normal [mem 0x00002000-0x1affffff]Movable zone start for each nodeEarly memory node ranges node 0: [mem 0x00002000-0x1affffff]Initmem setup node 0 [mem 0x00002000-0x1affffff]Detected 3 available secondary CPU(s)Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytesMIPS secondary cache 256kB, 8-way, linesize 32 bytes.PERCPU: Embedded 9 pages/cpu @81364000 s6272 r8192 d22400 u36864Built 1 zonelists in Zone order, mobility grouping on. Total pages: 109726Kernel command line: log_buf_len individual max cpu contribution: 4096 byteslog_buf_len total cpu_extra contributions: 12288 byteslog_buf_len min size: 16384 byteslog_buf_len: 32768 bytesearly log buf free: 14280(87%)PID hash table entries: 2048 (order: 1, 8192 bytes)Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)Writing ErrCtl register=0007c95fReadback ErrCtl register=0007c95fnmi base is 813fc200Memory: 431420K/442360K available (4925K kernel code, 216K rwdata, 936K rodata, 240K init, 541K bss, 10940K reserved)SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1Hierarchical RCU implementation.NR_IRQS:64tc3162_time_init: Init bus timeout and watchdogCPU frequency 900.00 MHzplat_time_init: Entered, mips_timer_ack ptr is [80007378] Using 200.000 MHz high precision timer.r4k_clockevent_init: setup_irq OK, irq is [52]console [ttyS0] enabledconsole [ttyS0] enabledbootconsole [early0] disabledbootconsole [early0] disabledCalibrating delay loop... 589.00 BogoMIPS (lpj=2945024)pid_max: default: 32768 minimum: 301Security Framework initializedMount-cache hash table entries: 1024 (order: 0, 4096 bytes)Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)Initializing cgroup subsys devicesInitializing cgroup subsys freezerInitializing cgroup subsys net_clsInitializing cgroup subsys blkioInitializing cgroup subsys debug34K sync es set to 0.Config7: 0x80090500launch: starting cpu1launch: cpu1 gone!Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytesMIPS secondary cache 256kB, 8-way, linesize 32 bytes.CPU1 revision is: 0001992f (MIPS 1004Kc)Synchronize counters for CPU 1: done.launch: starting cpu2launch: cpu2 gone!Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytesMIPS secondary cache 256kB, 8-way, linesize 32 bytes.CPU2 revision is: 0001992f (MIPS 1004Kc)Synchronize counters for CPU 2: done.launch: starting cpu3launch: cpu3 gone!Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytesMIPS secondary cache 256kB, 8-way, linesize 32 bytes.CPU3 revision is: 0001992f (MIPS 1004Kc)Synchronize counters for CPU 3: done.Brought up 4 CPUsdevtmpfs: initializedNET: Registered protocol family 16PCIe 7516 PHY init PCIe driver version: 751627.1.20170815EN751627 pcie_initcheck pcie link up status: isRC0_LINKUP=1 isRC1_LINKUP=1 registering PCI controller with io_map_base unsetInitializing Ecnt Event Netlink SocketInitializing Econet Event Netlink Socket nl_sk = 9ad58800usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbPCI host bridge to bus 0000:00pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]pci_bus 0000:00: root bus resource [io 0x1f600000-0x1f61ffff]pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguringpci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguringpci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x201fffff]pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]pci 0000:00:00.0: PCI bridge to [bus 01]pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit]pci 0000:00:01.0: PCI bridge to [bus 02]pci 0000:00:01.0: bridge window [mem 0x20100000-0x201fffff]NET: Registered protocol family 8NET: Registered protocol family 20Switched to clocksource MIPSNET: Registered protocol family 2TCP established hash table entries: 4096 (order: 2, 16384 bytes)TCP bind hash table entries: 4096 (order: 3, 32768 bytes)TCP: Hash tables configured (established 4096 bind 4096)TCP: reno registeredUDP hash table entries: 256 (order: 1, 8192 bytes)UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)NET: Registered protocol family 1 mt7512_pcie_fixup: 0x1438 = 20000014 mt7512_pcie_rc0_retrain: 80 = 01408c12 80 = 01608c12RC0 Link Traing Result: 10120008 mt7512_pcie_fixup: 0x3438 = 20100014 mt7512_pcie_rc1_retrain: 80 = 01408c12 80 = 01608c12RC1 Link Traing Result: 10120008TC3162 hardware watchdog module loaded.USB overcurrent protection.futex hash table entries: 1024 (order: 4, 65536 bytes)squashfs: version 4.0 (2009/01/31) Phillip Lougherntfs: driver 2.1.31 [Flags: R/W DEBUG].msgmni has been set to 842io scheduler noop registered (default)ttyS0 at I/O 0xbfbf0003 (irq = 5, base_baud = 7200) is a TC3162ECNT ring buffer init successInit UART2 and UART3, still need to trun on for using.ttyS20 at I/O 0xbfbf0300 (irq = 4, base_baud = 7200) is a TC3162ttyS30 at I/O 0xbfbe1000 (irq = 3, base_baud = 7200) is a TC3162brd: module loadedSPI Flash Init StartFound no SPI flash deviceIS_SPIFLASH=0x0, IS_NANDFLASH=0x2, (0xBFA10114)=0x6)Set SPI Clock to 50 Mhzspi_nand_probe: mfr_id=0xef, dev_id=0xabUsing Flash ECC.Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25M02G, Flash Size=0x10000000spi nand flashtc3162: flash device 0x01000000 at 0x1c000000EN7512 mtd init: spi nand probe enter[spi_nand_setup] : Enter nand: device found, Manufacturer ID: 0xef, Chip ID: 0xabnand: Unknown _SPI_NAND_DEVICE_ID_W25M02Gnand: 256MiB, SLC, page size: 2048, OOB size: 64nand_scan_ident ok[spi_nand_setup]: chip size = 0x10000000, erase_shift=0x11bmt pool size: 163 BMT & BBT Init Success parsing partition 11: name , offset ffffffff, size 7600000, mask flags 0partition 10: name , offset ffffffff, size 100000, mask flags 0partition 9: name , offset ffffffff, size 400000, mask flags 0partition 8: name , offset ffffffff, size 100000, mask flags 0partition 7: name , offset ffffffff, size ffffffff, mask flags 0partition 4: name , offset ffffffff, size 3800000, mask flags 0partition 1: name , offset ffffffff, size fffffffe, mask flags 0partition 0: name , offset ffffffff, size fffffffe, mask flags 0Creating 13 MTD partitions on "EN7512-SPI_NAND":0x000000000000-0x000000040000 : "bootloader"0x000000040000-0x000000080000 : "romfile"0x000000080000-0x00000028ccdd : "kernel"mtd: partition "kernel" doesn't end on an erase block -- force read-only0x00000028ccdd-0x0000016ccce1 : "rootfs"mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only0x000000080000-0x000003880000 : "tclinux"0x000003880000-0x000003a8cc01 : "kernel_slave"mtd: partition "kernel_slave" doesn't end on an erase block -- force read-only0x000003a8cc01-0x000004e0cc05 : "rootfs_slave"mtd: partition "rootfs_slave" doesn't start on an erase block boundary -- force read-only0x000003880000-0x000006ee0000 : "tclinux_slave"0x000006ee0000-0x000006fe0000 : "wwan"0x000006fe0000-0x0000073e0000 : "data"0x0000073e0000-0x0000074e0000 : "rom-d"0x0000074e0000-0x00000eae0000 : "misc"0x00000eae0000-0x00000eba0000 : "reservearea"rootfsPPP generic driver version 2.4.2PPP BSD Compression module registeredPPP Deflate Compression module registeredNET: Registered protocol family 24usbcore: registered new interface driver cdc_acmcdc_acm: USB Abstract Control Model driver for USB modems and ISDN adaptersusbcore: registered new interface driver usbserialusbcore: registered new interface driver usbserial_genericusbserial: USB Serial support registered for genericusbcore: registered new interface driver cypress_m8usbserial: USB Serial support registered for DeLorme Earthmate USBusbserial: USB Serial support registered for HID->COM RS232 Adapterusbserial: USB Serial support registered for Nokia CA-42 V2 Adapterusbcore: registered new interface driver ftdi_siousbserial: USB Serial support registered for FTDI USB Serial Devicehidraw: raw HID events driver (C) Jiri Kosinausbcore: registered new interface driver usbhidusbhid: USB HID core driverGACT probability NOT onu32 classifier Actions configuredNetfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (6740 buckets, 26960 max)ctnetlink v0.93: registering with nfnetlink.nf_conntrack_rtsp v0.7 loadingnf_nat_rtsp v0.7 loadingnf_tables: (c) 2007-2009 Patrick McHardy nf_tables_compat: (c) 2012 Pablo Neira Ayuso xt_time: kernel timezone is -0000ip_tables: (C) 2000-2006 Netfilter Core Teamipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfullyTCP: cubic registeredInitializing XFRM netlink socketNET: Registered protocol family 10sit: IPv6 over IPv4 tunneling driverNET: Registered protocol family 17NET: Registered protocol family 15bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.8021q: 802.1Q VLAN Support v1.8tc3162ser_startup VFS: Mounted root (squashfs filesystem) readonly on device 31:3.Freeing unused kernel memory: 240K (805f4000 - 80630000)mknod: /dev/ppp: File existsmknod: /dev/ptmx: File existsmknod: /dev/ptyp0: File existsmknod: /dev/ptyp1: File existsmknod: /dev/ptyp2: File existsmknod: /dev/ttyp0: File existsmknod: /dev/ttyp1: File existsmknod: /dev/ttyp2: File existsmknod: /dev/watchdog: File existsmknod: /dev/ttyS20: File existsmknod: /dev/ttyS30: File existsmknod: /dev/hwnat0: File existsmknod: /dev/acl0: File existsmknod: /dev/ac0: File existsmknod: /dev/mtr0: File exists**************prepare var*****************busybox init and set affinit started: BusyBox v1.20.1 (2020-05-15 14:51:49 CST)chmod: /userfs/profile.cfg: Read-only file systemTCSUPPORT_IPV6/dev created at preinitReading MT7615 2.4G EEPROM from flash reserveareamtd[readflash]:device=reservearea tclen=1024 tcoffset=0Unlocking reservearea ...Reading from reservearea to /etc/RT30xxEEPROM.bin ... Reading MT7615 5G EEPROM from flash reserveareamtd[readflash]:device=reservearea tclen=1024 tcoffset=131072Unlocking reservearea ...Reading from reservearea to /etc/Wireless/RT2860AP_AC/RT30xxEEPROM.bin ... Reading MT7615 2.4G CALDATA from flash reserveareamtd[readflash]:device=reservearea tclen=36864 tcoffset=4096Unlocking reservearea ...Reading from reservearea to /etc/CALDATA_default.bin ... Reading MT7615 5G CALDATA from flash reserveareamtd[readflash]:device=reservearea tclen=36864 tcoffset=135168Unlocking reservearea ...Reading from reservearea to /etc/Wireless/RT2860AP_AC/CALDATA_default.bin ... insmod ETH_LAN driverExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. SuccessfulExec. Successfulinstall dmt for mt7510TCSUPPORT_WLANTCSUPPORT_WLAN_MT7615TCSUPPORT_MAP_FILTERifconfig: SIOCGIFFLAGS: No such device**************lan port init*****************four portsdevice eth0 is not a slave of br0taskset: invalid number '0x8'date: invalid date '010100002012'/etc/init.d/rcS: line 1457: /userfs/bin/wpa_supplicant: not foundCO-FW parameter.......... PRODUCT_NAME_VOIP_CHECK=1MTK DSP supportvoip_loader startSTART CHECK ZARLIN ZSI[SLIC] le9642Loading le9642,slic num:1Loading commoninit mod-ksocketinit mod-acodecinit mod-foip3voip loader endtaskset: invalid number '0x8'taskset: invalid number '0x8'taskset: invalid number '0x8'taskset: invalid number '0x8'taskset: invalid number '0x8'wan ether supportTCSUPPORT_WLAN_SW_RPSVDSP_GetInstance:278/proc/net/skbmgr_4k_limit ???Jan 1 00:00:28 crond[433]: crond: crond (busybox 1.20.1) started, log level 8START disable Lan and Wan...ln: /dev/log: File exists1970-01-01 00:00:29 dnsmasq, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr23 successfullydnsmasq: unknown user or group: root1970-01-01 00:00:29 zcmd, zcmd.c:6172, main(), INFO: Start ZCMD daemon1970-01-01 00:00:29 zcmd, uitimer.c:95, UITimerProc(), INFO: thread startskillall: zywifid_run.sh: no process killedzcfg_schema.binkillall: zywifid: no process killed1970-01-01 00:00:30 zywifid, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 40 bind server socket 3 on /var/lib/.sock/zcfg_sockaddr40 successfully*reg=0000001c value:68106810Load NComm TMS Module.zywifid> [ALERT] wifi_module_init:1082: load libzywl_001_ecn.so ..........Find MTD Device /dev/mtd1 with name romfile.mtd.oobsize 64 mtd.writesize 2048romfile type ffffromfile size 4294967295romfile crc 65535zywifid> [ALERT] main:1211: Check and fix Wifi MAC address......Please press Enter to activate this console. rm: can't remove '/tmp/wifiScanTime*': No such file or directoryMAX Number of Interface Stack is 254Enter zcmdTr98MapTableInitzcmdTr98ParmAttrNodeBuild:zcmdTr98ParmAttrNodeBuild: obj 67176 3,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=1zcmdTr98ParmAttrNodeBuild: obj 67176 4,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=2zcmdTr98ParmAttrNodeBuild: obj 67176 5,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=3zcmdTr98ParmAttrNodeBuild: obj 67176 6,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=4zcmdTr98ParmAttrNodeBuild: obj 67176 7,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=5zcmdTr98ParmAttrNodeBuild: obj 67176 8,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=6zcmdTr98ParmAttrNodeBuild: obj 67176 9,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=7zcmdTr98ParmAttrNodeBuild: obj 67176 10,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=8zcmdTr98ParmAttrNodeBuild: obj 67176 11,1,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=9zcmdTr98ParmAttrNodeBuild: obj 64788 1,0,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=10zcmdTr98ParmAttrNodeBuild: obj 14568 0,0,0,0,0,0 nSetParmAttr 2setParmAttrNodeLst Add, n=11zcmdTr98ParmAttrNodeBuild: obj 16920 0,0,0,0,0,0 nSetParmAttr 1setParmAttrNodeLst Add, n=12zcmdTr98ParmAttrNodeBuild: obj 112704 0,0,0,0,0,0 nSetParmAttr 2setParmAttrNodeLst Add, n=13zcmdTr98ParmAttrNodeBuild: obj 87144 1,0,0,0,0,0 nSetParmAttr 3setParmAttrNodeLst Add, n=14mainDhcpPoolInfo[0]= 1 [1 0]mainDhcpPoolInfo[1]= 0 [0 0]mainDhcpPoolInfo[2]= 0 [0 0]mainDhcpPoolInfo[3]= 0 [0 0]mainDhcpPoolInfo[4]= 0 [0 0]mainDhcpPoolInfo[5]= 0 [0 0]mainDhcpPoolInfo[6]= 0 [0 0]mainDhcpPoolInfo[7]= 0 [0 0]mainDhcpPoolInfo[8]= 0 [0 0]mainDhcpPoolInfo[9]= 0 [0 0]mainDhcpPoolInfo[10]= 0 [0 0]mainDhcpPoolInfo[11]= 0 [0 0]mainDhcpPoolInfo[12]= 0 [0 0]mainDhcpPoolInfo[13]= 0 [0 0]mainDhcpPoolInfo[14]= 0 [0 0]mainDhcpPoolInfo[15]= 0 [0 0]zcmdTr98MapTableInit End1970-01-01 00:00:31 zcmd, zcmd.c:6279, main(), INFO: tr98 map table initedzcmdReleaseTr98ObjParamMapping: no this object mappingzcmdReleaseTr98ObjParamMapping: object 86172 has mapping objectzcmdReleaseTr98ObjParamMapping: object index attrzcmdReleaseTr98ObjParamMapping: object index 1zcmdReleaseTr98ObjParamMapping: Release object 86172 mapping with datazcmdTr98MappingGrpQry: obj 86172 1,0,0,0,0,0 queried group 0zcmdTr98MtRecognizeRDMappingOnRelease: objnum 86172, List obj 86172zcmdTr98MappingGrpQry: obj 87144 1,0,0,0,0,0 queried group 0zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87144, List obj 87144setParmAttrNodeLst Delete, n=13=====zcmdTr98MtObjDelete=====seqnum=181=====zcmdTr181MtObjDelete=====oid=87144=====zcmdTr98MtObjDelete=====seqnum=180=====zcmdTr181MtObjDelete=====oid=861721970-01-01 00:00:31 zcmd, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 1 bind server socket 4 on /var/lib/.sock/zcfg_sockaddr1 successfully1970-01-01 00:00:31 zcmd, zcmd_config_apply.c:1557, zcmdModuleConfigHandleTask(), INFO: thread starts1970-01-01 00:00:31 zcmd, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 69 bind server socket 5 on /var/lib/.sock/zcfg_sockaddr69 successfully1970-01-01 00:00:31 zcmd, zcmd_config_apply.c:1639, zcmdConfigApplyTask(), INFO: thread starts1970-01-01 00:00:31 zcmd, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 67 bind server socket 6 on /var/lib/.sock/zcfg_sockaddr67 successfully/bin/sh: dsldiagd: not found1970-01-01 00:00:31 esmd, esmd.c:2126, main(), INFO: ESMD StartESMD msg server init...1970-01-01 00:00:31 esmd, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 2 bind server socket 0 on /var/lib/.sock/zcfg_sockaddr2 successfully[ESMD] Initial kernel monitor ...kernelFd=71970-01-01 00:00:31 zcmd, zcmd.c:5637, zcmdActiveZtr69(), INFO: thread startsFind MTD Device /dev/mtd8 with name wwan.mtd.oobsize 64 mtd.writesize 2048[1;34mFW_WATCHER Start[0mNotice: zyUtilUpdateWWANPackage, No WWAN Package in Flash!wwanpackage info: revision is 1.181970-01-01 00:00:31 esmd, esmd.c:1992, timer_thread(), INFO: thread startszyUtilTcpSvrInit1970-01-01 00:00:31 esmd, esmd.c:1611, _esmd_thread(), INFO: ESMD ground thread starts1970-01-01 00:00:31 esmd, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 66 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr66 successfully1970-01-01 00:00:31 esmd, esmd.c:1603, _esmd_thread(), INFO: ESMD usr config thread startszcmdBeInit(): DL opening...Initial begui_customization....Initial bedevice....Chain MACFILTER already exists.devObj->DeviceSummary = InternetGatewayDevice:1.4[](Baseline:1,EthernetLAN:2,WiFiLAN:1,ADSLWAN:1,ADSL2WAN:1,VDSL2WAN:1,PTMWAN:1,EthernetWAN:1,QoS:1,Time:1,IPPing:1),VoiceService:1[](Endpoint:1,SIPEndpoint:1,TAEndpoint:1)Initial bedsl....sh: you need to specify whom to killInitial beatmlink....Initial beptmlink....Jan 1 00:00:33 crond[637]: crond: crond (busybox 1.20.1) started, log level 8Initial belog....killall: tty_log_echo: no process killedkillall: mailsend: no process killedSet interval time = 60 secondkillall: syslog-ng: no process killedError resolving user; user='root'Initial besysinfo....Initial beaccount....mkdir: can't create directory '/var/tmp': File existschmod: /data/zcfg_predef.json: No such file or directorychmod: /data/zcfg_predef.json: No such file or directoryInitial bedevinfo....1970-01-01 00:00:35 zcmd, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendto /var/lib/.sock/zcfg_sockaddr9, errno = 2(No such file or directory), srcEid = 1, dstEid = 9, type = 273 without reply, oid = 01970-01-01 00:00:35 zcmd, zcfg_msg.c:822, zcfg_msg_sendAndGetReply(), ERROR: fail to send message. ret = -5Initial beethlink....Initial beethintf....auto, Auto-negotiation enabled.No common media type was autonegotiated!This is extremely unusual and typically indicates a configuration error.Perhaps the advertised capability set was intentionally limited.Link is downauto, Auto-negotiation enabled.No common media type was autonegotiated!This is extremely unusual and typically indicates a configuration error.Perhaps the advertised capability set was intentionally limited.Link is downauto, Auto-negotiation enabled.No common media type was autonegotiated!This is extremely unusual and typically indicates a configuration error.Perhaps the advertised capability set was intentionally limited.Link is downauto, Auto-negotiation enabled.No common media type was autonegotiated!This is extremely unusual and typically indicates a configuration error.Perhaps the advertised capability set was intentionally limited.Link is downInitial bewifi_radio....Initial bewifi_ssid....Initial bewifi_ap....Initial bebridging....Initial bebridgingbr....Initial bebridgePort....device ra0 is not a slave of br0interface ra1 does not exist!device rai0 is not a slave of br0interface rai1 does not exist!interface rai3 does not exist!Initial bebridgeFilter....Initial bewifi....Initial beipiface....zywifid:Config> [ERROR] zyWifiUpdateLanInfo:404: No wifi interface on module(ECN)./bin/sh: zy1905App: not foundzcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcmdTr98SyncTr98WANConnectNum: obj 65676 seqnum 204zcfgBeWanInitIntfMark : EnterzcfgBeWanInitIntfMark: Init IfMark Done !!Initial benatIntf....modprobe: module nf_nat_ftp not found in modules.depmodprobe: module nf_conntrack_ftp not found in modules.depmodprobe: module nf_nat_ftp not found in modules.depftp switch turn onsip switch turn onmodprobe: module nf_conntrack_rtsp not found in modules.deprtsp switch turn onpptp switch turn onInitial bev4addr....Initial bev6addr....Initial bev6prefix....Initial beusbhost....Initial beusbintf....Initial beusbport....Initial berouter....Initial berainfo....Initial bedhcp4_server....Initial bedhcp4_serverpool....Initial bedhcp4_serverpool_staticaddr....Initial bedhcp4_serverpool_option....Initial bedhcp4_serversubnet....restart DNSMASQ...killall: dnsmasq: no process killed1970-01-01 00:01:11 dnsmasq, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr23 successfullyInitial bedhcp4_relay....Initial bedhcp6_server....Initial bedhcp6_serverpool....Initial bevlanTerm....Initial bepppiface....zcmdTr98SyncTr98WANConnectNum: obj 63672 seqnum 218Initial bepppifaceipcp....Initial bedhcp4_client....Initial bedhcp6_client....1970-01-01 00:01:11 zcmd, be_dhcp6_client_config_init.c:29, beConfigBoot(), INFO: boot Dhcp6 ClientInitial beradvd....Initial bedns....Initial bedns_route....Initial bedns_server....zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708zcmdTr98MtRecognizeRDMappingOnRelease: objnum 87708, List obj 87708Initial benat_port_map....Initial benat_port_trigger....Initial benat_addr_mapping....Initial begre_tunnel....modprobe ip_gremodprobe: module ip_gre not found in modules.depInitial besessCtl..../bin/sh: can't create /proc/zy_nf_ct_udp_STB_port: nonexistent directory/bin/sh: can't create /proc/zy_nf_ct_udp_STB_timeout: nonexistent directoryInitial befirewall....getL1InterfaceUpstream: 561 USB.Interface.1getL1InterfaceUpstream: 561 USB.Interface.1Initial betr69....Initial beddns....Initial betime....Initial bediagnostic....killall: tmsctl: no process killedInitial beschedule....Initial beparenCtl....Initial beqos....Initial beqosQueue....Initial beqosClass....Initial beqosShaper....Initial beqosPolicer....Initial be6rd....Initial beigmp....cp: can't stat '/etc/mcpd_igmp.conf': No such file or directorybeigmp!/bin/sh: can't create /proc/zy_igmp_noipsrcaddr_enable: nonexistent directoryrestart DNSMASQ...[beIgmpCreateCfg](122) Failed.Initial besnmp....Boot SNMPInitial bemld....1970-01-01 00:01:13 dnsmasq, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 23 bind server socket 9 on /var/lib/.sock/zcfg_sockaddr23 successfullycp: can't stat '/etc/mcpd_mld.conf': No such file or directorycat: can't open '/var/run/ecmh.pid': No such file or directorysh: you need to specify whom to killInitial bevcAutoHunt....Initial bevlanAutoHunt....Initial beupnp....Initial bemacfilter....Initial bemacfilter_whitelist....Initial beuserinterface....Initial beremoMgmt....Initial bechangehosticon....Initial behosts....Initial behostshost....Initial becert....Initial beportmirror....Initial bedslite....Initial beSTBVendorID....Initial berip....killall: ripd: no process killedwriting RSA keyInitial betr64....Initial bewwanbackup....Initial besamba....Initial http with port(443), SSL enable.Initial http with port(80), SSL disable.1970-01-01 00:01:15 zhttpd, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 15 bind server socket 58 on /var/lib/.sock/zcfg_sockaddr15 successfullywwanbackup info: WWANBACKUP startwwanbackup info: WWANBACKUP_DEBUG is 0starting smbd.samba start okInitial bevoiceSrv....Initial bevoiceCap....Initial bevoiceCapSip....bePppIfaceSet: PPP.Interface.1bePppIfaceSet : Enable new or enable existingInitial bevoiceCapCodec....Initial bevoiceCommon....Initial bevoiceProf....Initial bevoiceProfSip....Initial bevoiceProfFaxT38....Initial bevoiceProfNumberingPlan....Initial bevoiceProfNumberingPlanPrefixInfo....Initial bevoiceProfRTP....Initial bevoiceProfRTPSRTP....Initial bevoiceLine....Initial bevoiceLineSip....Initial bevoiceLineProc....Initial bevoiceLineCallingFeatures....Initial bevoiceLineCodecList....Initial bevoiceLineStats....Initial bevoiceLineRinger....Initial bevoiceLineRingerDescription....Initial bevoicePhyIntf....Initial bevoiceSpeedDialBookList....Initial bevoiceCallPolicyBook....Initial bevoiceCallPolicyBookList....Initial bevoiceCallStatus....Initial bednsentry....Initial bezx....Initial bedlna....Initial bevlangroup....Initial beTFTPServerName....Initial bespeedtest....Initial beoneconnect....Initial beoneconnectPCRule....Initial bePwrMgmt....Initial bewifi_easymesh....Initial bewifi_onessid....[1;34mBack-end module init finished[0m[1;34mInitial USB driver...[0mturn on ztr69zcfgFeTr98QueryHandleRoutInitcwmp_get_acsInfo: reset redirect server1970-01-01 00:01:18 ztr69, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 9 bind server socket 59 on /var/lib/.sock/zcfg_sockaddr9 successfully/bin/sh: /etc/init.d/mcpd.sh: not foundSTART enable Lan and Wan.../bin/sh: /usr/sbin/zy1905: not found/bin/sh: /usr/sbin/zy1905Monitor: not foundrm: can't remove '/tmp/app_sock': No such file or directoryTR181 object IP.Interface.1writing RSA keybridge name br0Initial http with port(20443), SSL enable.database_init : /data/netprb_db_verdatabase_init : database_ver 18database_init : Create Device tabledatabase_init : Create Sub Interface tabledatabase_init : Create L2 Device Functions tablearp_init : arp_event->event_id 1layer2_init : layer2_event->event_id 2oui_init : oui_event->event_id 3ethlink_init : ethlink_event->event_id 4zy1905_init : zy1905_event->event_id 5[/sbin/wwan-package-match.sh] VID 1d6b no match, exitjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:22 zupnp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 656761970-01-01 00:01:22 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004[/sbin/wwan-package-match.sh] VID 1d6b no match, exit1970-01-01 00:01:23 zhttpd_rest, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 1148281970-01-01 00:01:23 one_connect_monitor, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708[/sbin/usb-hotplug.sh] add /var/usb/usb11970-01-01 00:01:24 zupnp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 656761970-01-01 00:01:24 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 38004json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:25 zhttpd_rest, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 1148281970-01-01 00:01:25 one_connect_monitor, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 1267081970-01-01 00:01:26 zupnp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 656761970-01-01 00:01:26 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 380041970-01-01 00:01:27 zhotplugd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 41016json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:27 zhttpd_rest, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 114828json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:27 one_connect_monitor, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 1267081970-01-01 00:01:28 zupnp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 656761970-01-01 00:01:28 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 380041970-01-01 00:01:29 zhotplugd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 410161970-01-01 00:01:29 zhttpd_rest, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 1148281970-01-01 00:01:29 one_connect_monitor, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:30 zupnp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 656761970-01-01 00:01:30 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 380041970-01-01 00:01:31 zhotplugd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 410161970-01-01 00:01:31 zhttpd_rest, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 1148281970-01-01 00:01:31 one_connect_monitor, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:32 zupnp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 656761970-01-01 00:01:32 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 380041970-01-01 00:01:33 zhotplugd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 410161970-01-01 00:01:33 zhttpd_rest, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 77, select() wait forever, EID = 1, type = 2 with reply, oid = 1148281970-01-01 00:01:33 one_connect_monitor, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 78, select() wait forever, EID = 1, type = 2 with reply, oid = 126708json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:34 zupnp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 17, select() wait forever, EID = 1, type = 2 with reply, oid = 656761970-01-01 00:01:34 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 380041970-01-01 00:01:35 zhotplugd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 32, select() wait forever, EID = 1, type = 1 with reply, oid = 410161970-01-01 00:01:35 zcmd, zcmd.c:6410, main(), WARNING: process msg type = 2 with reply, oid = 65676, from EID = 17 by 14553 mszyExtRemoteMgmtSrvObjGet : Enterl3fwdObjGet : Enterl3fwdGetDfGwByRtTable: enter, 4DeviceDiscRespPayload= "ApiName": "ZYXEL RESTful API", "ModelName": "VMG8825-T50", "SoftwareVersion": "V5.50(ABPY.1)b11", "DeviceMode": "Router", "SupportedApiVersion": [ "ApiVersion": "1.0", "LoginURI": "\/api\/v1\/UserLogin", "Protocol": "HTTPS", "HttpsPort": 20443 ], "MAC": "08:26:97:DA:DD:80" 1970-01-01 00:01:35 zhttpd_rest, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 77 bind server socket 13 on /var/lib/.sock/zcfg_sockaddr77 successfullyhotplug:beUsbPortSet: USB Port Alias is cpe-hotplug:beUsbPortSet: USB Port Type is Devicedb_init() Open database: not an errorAPP Agent UDP socket ready!l3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!!Restarting ZyIMS VoIPppe cmd done!ppe cmd done![/sbin/wwan-package-match.sh] VID 1d6b no match, exitppe cmd done!killall: voiceApp: no process killedppe cmd done!killall: mm.exe: no process killedppe cmd done!ppe cmd done!killall: icf.exe: no process killedppe cmd done!json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryppe cmd done!json_object_from_file: error opening file /tmp/zy1905.json: No such file or directorydonedevice ra0 is already a member of a bridge; can't enslave it to bridge br0.device ra1 is already a member of a bridge; can't enslave it to bridge br0.[/sbin/wwan-package-match.sh] VID 1d6b no match, exitbePtmLinkStatGet : Enter============================================================================UPnP Mapping table Dump:TR98 Object Name : UPnP service IdInternetGatewayDevice.Layer3Forwarding : urn:upnp-org:serviceId:Layer3Forwarding.1============================================================================l3fwdObjGet : Enterl3fwdGetDfGwByRtTable: enter, 4/bin/sh: zy1905App: not foundl3fwdGetDfGwByRtTable: ifname = l3fwdGetDfGwByRtTable: No find default gateway interface!![/sbin/usb-hotplug.sh] add /var/usb/usb2json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory[MM] main(): getpid = 1882AppRegisterSignal(): mm.exe pid = 1882UITimer_Init()...[MM]dspDriverDeinit(): DSP & Phone Port driver is already De-initialized ==> skip the action!!UITimerProc(): The UI Timer System (thread task: 'vo-USR-UItimer', pid=1882) is running...json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryAppRegisterSignal(): voiceApp pid = 1883UITimer_Init()...1970-01-01 00:01:39 voiceApp, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 12 bind server socket 10 on /var/lib/.sock/zcfg_sockaddr12 successfully[1;36;44m### ZyIMS VoIP TR-104 Config Data Init Procedure Start ###[0mUITimerProc(): The UI Timer System (thread task: 'vo-USR-UItimer', pid=1883) is running...1970-01-01 00:01:40 zupnp, zcfg_msg.c:598, zcfg_msg_serverInit(), INFO: EID 17 bind server socket 14 on /var/lib/.sock/zcfg_sockaddr17 successfullymain(): getpid = 1881[ENTERED]:ICF_ESINFO: AUTO_SCALE: 1 INFO: MODE_OF_OPERATION: 0 INFO: SIP_COMPACT_HDRS: NO INFO: NW_TRACE_ENABLED: YES INFO: ICF_DEF_SIP_SERVER_PORT: 6062 INFO: ICF_DEF_SIP_PROXY_PORT: 6061 INFO: TRANSPORT_MODE: 0 INFO: ICF_SYS_RESOURCE_LIMIT: 1 [ENTERING]:icf_es_init[ICF_ES]:PORT initalized succesfullyicf_port_open_ipc_channel path = /var/iptk_es.chanlthe open channel succeded exit from the es init icf_register_signal(): icf.exe pid = 1881json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:42 voiceApp, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 12, select() wait forever, EID = 1, type = 1 with reply, oid = 4681970-01-01 00:01:42 esmd, zcfg_msg.c:235, _msg_recv(), WARNING: EID = 2, select() wait forever, EID = 1, type = 1 with reply, oid = 616081970-01-01 00:01:42 zcmd, zcfg_msg.c:242, _msg_recv(), WARNING: EID = 1, select() wait for 2000 milli-seconds, EID = 12, type = 2004 with reply, oid = 01970-01-01 00:01:42 zcmd, zcfg_msg.c:844, zcfg_msg_sendAndGetReply(), ERROR: fail to receive message. ret = -1 beVoiceCapConfigStatsUpdate() beVoiceSendMsgToZyIMSAndGetReply failed -5 use default list1970-01-01 00:01:42 zcmd, zcmd.c:6410, main(), WARNING: process msg type = 1 with reply, oid = 468, from EID = 12 by 2031 mshotplug:beUsbPortSet: USB Port Alias is cpe-hotplug:beUsbPortSet: USB Port Type is Device1970-01-01 00:01:42 esmd, esmd.c:1565, processRequest(), WARNING: process msg type = 235 without reply, oid = 0, from EID = 1 by 24824 mszcmd.c line 5582, zcmdReqProcess() : get ZCFG_MSG_INIT_DATAMODEL_FINECONET/zcmd_wrapper.c line 2046, zcmdEnableConfigSave() : enable tr98mapTableSaveFlag and configSaveFlagtr104ConvertPortsType(): INVALID parameter value : '' !!tr104ConvertDialingType(): INVALID parameter value : '' !!tr104ConvertDialToneType(): INVALID parameter value : '' !!tr104ConvertReceiveToneType(): INVALID parameter value : '' !!tr104ConvertCallerIDType(): INVALID parameter value : '' !!tr104ConvertCallerIDPayloadType(): INVALID parameter value : '' !!tr104ConvertTASType(): INVALID parameter value : '' !!tr104ConvertTASType(): INVALID parameter value : '' !!zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !tr104ConvertPortsType(): INVALID parameter value : '' !!tr104ConvertDialingType(): INVALID parameter value : '' !!tr104ConvertDialToneType(): INVALID parameter value : '' !!tr104ConvertReceiveToneType(): INVALID parameter value : '' !!tr104ConvertCallerIDType(): INVALID parameter value : '' !!tr104ConvertCallerIDPayloadType(): INVALID parameter value : '' !!tr104ConvertTASType(): INVALID parameter value : '' !!tr104ConvertTASType(): INVALID parameter value : '' !!zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directorytr104ConvertRegType(): INVALID parameter value : '' !!count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrlmapd_interface_ctrl_open failedCan't connect to /tmp/mapd_ctrljson_object_from_file: error opening file /tmp/dump.txt: No such file or directory[initALTable] second chance - dump information is not ready. Update 1905 information Error!!tr104ConvertCWStatus(): INVALID parameter value : '' !!tr104ConvertRegType(): INVALID parameter value : '' !!zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !tr104ConvertCWStatus(): INVALID parameter value : '' !!json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory[1;36;44m### ZyIMS VoIP TR-104 Config Data Init Procedure Successfully Finished ###[0mMM:voiceDspCoreInit(): Entering...[MM]dspDriverInit(): Start to initialize the DSP (& Phone Port) driver by calling 'PhoneInit(countryCode=24)'...PhoneInit(): region: 'NLD'.Country Name:NLDresult:9475208result:-9475208VDSP_GetInstance:278MM:voiceDspCoreInit(): after calling 'dsp_driver_itf.c/dspDriverGetInitData(initData@0x0, initDataLength=0)' to get the inited data of the MM part 'Endpoint_itf_mm.c/cmPhysEndpt[MAX_ENDPT]'...MM:voiceDspCoreInit(): after calling 'voiceEventIpcSendToVoiceApp()' to send the response message 'VOICE_DSP_INIT_RSP' back to [voiceApp]...MM:voiceDspCoreInit(): Exiting...with ret=1 & ret2=1 (MM_SUCCESS(1), MM_FAILURE(0))[Adam] Change log level to (EVA_LOG_ERR).[GDI] Change log level to (EVA_LOG_ERR).fxsPhoneIOP_hookFlashDetecTimerSet(): Invalid input timer value flashTimerMin=0, flashTimerMax=0 for the FXS phone port index-0!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0!fxsPhoneIOP_hookFlashDetecTimerSet(): Invalid input timer value flashTimerMin=0, flashTimerMax=0 for the FXS phone port index-1!! The valid condition is: both values should >= 0 except these two cases - (i)both values == 0, and (ii)(flashTimerMin >= flashTimerMax) while both values > 0!voiceDspInit(): The Phone (DSP Init) Data: LocationPtr=0x00000000, Size=-1!!DSP state is Inactive , so exit PhoneInitEventCb nowDSP activated successtaskCreate()...voiceDspInit(): Leaving with return 0... phonePortVMWISet enters (for 'FXS' phone, phid=8 (8:All 'Ports' of the type), vmwiSigType=2 (1:SigOn,2:SigOff,0:SigNone))...in PhoneEventCb , the event 18 is not support ! in PhoneEventCb , the event 18 is not support ! zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !taskCreate()...flushVoipRoutePolicy(): cmd = iptables -t mangle -F IP_ROUTE2_VOIP[1;36;44m### ZyIMS VoIP Start-up Procedure Finished ###[0mzyRegionLListAdd(): VoIP Country/Region Code 'MEX' is NOT supported, Skip it!!zyRegionLListAdd(): VoIP Country/Region Code 'CYP' is NOT supported, Skip it!!json_object_from_file: error opening file /tmp/zy1905.json: No such file or directory1970-01-01 00:01:49 voiceApp, zcfg_msg.c:419, _msg_send(), ERROR: fail to sendto /var/lib/.sock/zcfg_sockaddr1-1573323, errno = 2(No such file or directory), srcEid = 12, dstEid = 1, type = 103 without reply, oid = 0json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !json_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryget_iface_ipv4_address(): ioctl socket 'SIOCGIFADDR' fail for ifName() ==> try to get IP address info by searching the 'iface_ipv4_address_list[]' array database alternatively!!get_iface_ipv4_address(): Can't find any matched ifName() even in the 'iface_ipv4_address_list[]' array database!!mmCfgSelfIp()/SipAcctId=0: calling 'get_iface_ipv4_address()' to get the IP Address FAIL for the interface pProf->ZyXEL_ActiveBoundIfName='' (where pProf->name='ChangeMe', ZyXEL_BoundIfName='Multi_WAN', ZyXEL_BoundIfList='IP.Interface.4,IP.Interface.7,IP.Interface.10', ZyXEL_BoundIpAddr='') ==> return FALSE now!!mmCfgOfRtpInfo()/SipAcctId=0: MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!!mmIptkCfgOfSipAccount(PID = 1883): 'mmCfgOfRtpInfo(sipAccountId=0)' FAIL ===> try to continue processing the next SIP Account!!get_iface_ipv4_address(): ioctl socket 'SIOCGIFADDR' fail for ifName() ==> try to get IP address info by searching the 'iface_ipv4_address_list[]' array database alternatively!!get_iface_ipv4_address(): Can't find any matched ifName() even in the 'iface_ipv4_address_list[]' array database!!mmCfgSelfIp()/SipAcctId=1: calling 'get_iface_ipv4_address()' to get the IP Address FAIL for the interface pProf->ZyXEL_ActiveBoundIfName='' (where pProf->name='ChangeMe', ZyXEL_BoundIfName='Multi_WAN', ZyXEL_BoundIfList='IP.Interface.4,IP.Interface.7,IP.Interface.10', ZyXEL_BoundIpAddr='') ==> return FALSE now!!mmCfgOfRtpInfo()/SipAcctId=1: MM -> IPTK : 'mmCfgSelfIp(ICF_CFG_SET_SELF_IP_REQ)' FAILed ==> return FALSE now!!mmIptkCfgOfSipAccount(PID = 1883): 'mmCfgOfRtpInfo(sipAccountId=1)' FAIL ===> try to continue processing the next SIP Account!!zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !rm: can't remove '/tmp/app_sock': No such file or directoryaging_en: 1, aging time: 5aging_unit: 0, aging_cnt: 4write reg: a0, value: 4000get_if_info for br0interface index is 19get_if_info OKClean up temporary socketppe cmd done!ppe cmd done!bind_arp: ifindex=19Binding to ifindex 19ppe cmd done!ppe cmd done!ppe cmd done!ppe cmd done!bind_arp: ifindex=16Binding to ifindex 16ppe cmd done!ppe cmd done!MAC: 0x7fa8dc2c, len = 60x0000 : 08 26 97 da dd 81 bind_arp: ifindex=20Binding to ifindex 20donebind_arp: ifindex=21Binding to ifindex 21bind_arp: ifindex=22Binding to ifindex 22bind_arp: ifindex=17Binding to ifindex 17rai0 bbp:2308=303/bin/sh: can't create /proc/tc3162/lan_to_wifi_rps: nonexistent directorybind_arp: ifindex=28Binding to ifindex 28bind_arp: ifindex=29Binding to ifindex 29zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !bind_arp: ifindex=30Binding to ifindex 30zywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error ! opClass = 81, chn_num = 13 opClass = 83, chn_num = 9 opClass = 84, chn_num = 9 opClass = 81, chn_num = 13 opClass = 83, chn_num = 9 opClass = 84, chn_num = 9 opClass = 81, chn_num = 13 opClass = 83, chn_num = 9 opClass = 84, chn_num = 9device rai0 is already a member of a bridge; can't enslave it to bridge br0.killall: p1905_managerd: no process killed opClass = 81, chn_num = 13 opClass = 83, chn_num = 9 opClass = 84, chn_num = 9device rai1 is already a member of a bridge; can't enslave it to bridge br0. opClass = 115, chn_num = 4 opClass = 118, chn_num = 4 opClass = 121, chn_num = 11 opClass = 116, chn_num = 2 opClass = 119, chn_num = 2 opClass = 122, chn_num = 5 opClass = 117, chn_num = 2 opClass = 120, chn_num = 2 opClass = 123, chn_num = 5 opClass = 128, chn_num = 4 opClass = 129, chn_num = 2 opClass = 130, chn_num = 4 opClass = 115, chn_num = 4 opClass = 118, chn_num = 4 opClass = 121, chn_num = 11 opClass = 116, chn_num = 2 opClass = 119, chn_num = 2 opClass = 122, chn_num = 5 opClass = 117, chn_num = 2 opClass = 120, chn_num = 2 opClass = 123, chn_num = 5 opClass = 128, chn_num = 4 opClass = 129, chn_num = 2 opClass = 130, chn_num = 4 opClass = 115, chn_num = 4 opClass = 118, chn_num = 4 opClass = 121, chn_num = 11 opClass = 116, chn_num = 2 opClass = 119, chn_num = 2 opClass = 122, chn_num = 5 opClass = 117, chn_num = 2 opClass = 120, chn_num = 2 opClass = 123, chn_num = 5 opClass = 128, chn_num = 4 opClass = 129, chn_num = 2 opClass = 130, chn_num = 4device rai3 is already a member of a bridge; can't enslave it to bridge br0. opClass = 115, chn_num = 4 opClass = 118, chn_num = 4 opClass = 121, chn_num = 11 opClass = 116, chn_num = 2 opClass = 119, chn_num = 2 opClass = 122, chn_num = 5 opClass = 117, chn_num = 2 opClass = 120, chn_num = 2 opClass = 123, chn_num = 5 opClass = 128, chn_num = 4 opClass = 129, chn_num = 2 opClass = 130, chn_num = 4[WAPP]map_send_wirelss_inf_infosend info ra0, role: wiap, dev type = 1MAC Address = 08:26:97:da:dd:81send info ra1, role: wiap, dev type = 1MAC Address = 0a:26:97:da:dd:81send info ra2, role: wiap, dev type = 1MAC Address = 0a:26:97:ea:dd:81send info ra3, role: wiap, dev type = 1MAC Address = 0a:26:97:fa:dd:81send info rai0, role: wiap, dev type = 1MAC Address = 08:26:97:da:dd:82send info rai1, role: wiap, dev type = 1MAC Address = 0a:26:97:da:dd:82send info rai2, role: wiap, dev type = 1MAC Address = 0a:26:97:ea:dd:82send info rai3, role: wiap, dev type = 1MAC Address = 0a:26:97:fa:dd:82[1;32m inf_count = 8 [0m[1;32m 0 name ra0 ch 2, phymode [N] role [wiap][0m[1;32m 1 name ra1 ch 2, phymode [N] role [wiap][0m[1;32m 2 name ra2 ch 2, phymode [N] role [wiap][0m[1;32m 3 name ra3 ch 2, phymode [N] role [wiap][0m[1;32m 4 name rai0 ch 52, phymode [AC] role [wiap][0m[1;32m 5 name rai1 ch 52, phymode [AC] role [wiap][0m[1;32m 6 name rai2 ch 52, phymode [AC] role [wiap][0m[1;32m 7 name rai3 ch 52, phymode [AC] role [wiap][0mroute: SIOCADDRT: File existskillall: mapd: no process killeddaemon mapd attached \x00/tmp/wapp_ctrl[1;32mctrler_found [0m[WAPP]map_send_wirelss_inf_infosend info ra0, role: wiap, dev type = 1MAC Address = 08:26:97:da:dd:81send info ra1, role: wiap, dev type = 1MAC Address = 0a:26:97:da:dd:81send info ra2, role: wiap, dev type = 1MAC Address = 0a:26:97:ea:dd:81send info ra3, role: wiap, dev type = 1MAC Address = 0a:26:97:fa:dd:81send info rai0, role: wiap, dev type = 1MAC Address = 08:26:97:da:dd:82send info rai1, role: wiap, dev type = 1MAC Address = 0a:26:97:da:dd:82send info rai2, role: wiap, dev type = 1MAC Address = 0a:26:97:ea:dd:82send info rai3, role: wiap, dev type = 1MAC Address = 0a:26:97:fa:dd:82Profile Count to host = 0rm: can't remove '/tmp/app_sock': No such file or directorybridge name br0database_init : /data/netprb_db_verdatabase_init : database_ver 18database_init : Create Device tabledatabase_init : Create Sub Interface tabledatabase_init : Create L2 Device Functions tablearp_init : arp_event->event_id 1layer2_init : layer2_event->event_id 2oui_init : oui_event->event_id 3ethlink_init : ethlink_event->event_id 4zy1905_init : zy1905_event->event_id 5agentDataRecv: Start to receiving...0 ssid=TMNL-DADD81, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1send BH config to ra0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra3wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai3wapd sends WPAPSK = MRFNQVMQMXFBR4R91 ssid=TMNL-DADD81_guest1, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1send BH config to ra0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra3wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai3wapd sends WPAPSK = MRFNQVMQMXFBR4R92 ssid=TMNL-DADD81_guest2, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1send BH config to ra0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra3wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai3wapd sends WPAPSK = MRFNQVMQMXFBR4R93 ssid=TMNL-DADD81_guest3, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1send BH config to ra0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra3wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai3wapd sends WPAPSK = MRFNQVMQMXFBR4R91-iwpriv ra0 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv ra0 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found1-iwpriv ra1 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv ra1 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found1-iwpriv ra2 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv ra2 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not foundjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directory/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found1-iwpriv ra3 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv ra3 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found0 ssid=TMNL-DADD81, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1send BH config to ra0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra3wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai3wapd sends WPAPSK = MRFNQVMQMXFBR4R91 ssid=TMNL-DADD81_guest1, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1send BH config to ra0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra3wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai3wapd sends WPAPSK = MRFNQVMQMXFBR4R92 ssid=TMNL-DADD81_guest2_5G, autmode=0x0020, encryptype=0x0008, key=MRFNQVMQMXFBR4R9 bh_bss=0, fh_bss=1send BH config to ra0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to ra3wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai0wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai1wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai2wapd sends WPAPSK = MRFNQVMQMXFBR4R9send BH config to rai3wapd sends WPAPSK = MRFNQVMQMXFBR4R93 ssid=29a022df555f3c37f84a367e153831c, autmode=0x0020, encryptype=0x0008, key=d46025d0ff175f7d55ae756de8952d5a bh_bss=1, fh_bss=0send BH config to ra0wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5asend BH config to ra1wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5asend BH config to ra2wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5asend BH config to ra3wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5asend BH config to rai0wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5asend BH config to rai1wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5asend BH config to rai2wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5asend BH config to rai3wapd sends WPAPSK = d46025d0ff175f7d55ae756de8952d5a1-iwpriv rai0 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv rai0 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found1-iwpriv rai1 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv rai1 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found1-iwpriv rai2 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv rai2 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found1-iwpriv rai3 set AuthMode=WPA2PSK;/bin/sh: wifi_config_save: not found2-iwpriv rai3 set EncrypType=AES;/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not found/bin/sh: wifi_config_save: not foundjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directoryjson_object_from_file: error opening file /tmp/zy1905.json: No such file or directorycount =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrlSuccesfully opened connection to mapdzywifid> [ERROR] push_wifidReqProcess:590: Ignore request handler[ZCFG_MSG_WLAN_GET_CMD(4017)].Internal Error !count =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrlSuccesfully opened connection to mapdcount =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrlSuccesfully opened connection to mapdcount =3 1=/userfs/bin/mapd_cli 2=/tmp/mapd_ctrlSuccesfully opened connection to mapd 2ff7e9595c
Comments